Adaptec AMM-1510M Guia de Instalação descarregar pdf (Página 4)

AMM-1525M/1510M/525M Installation Guide

Part Number: 510659-00, Rev. A

Print Spec Number: 492931-00

Current Date: 9/19/94 ECN Date: 9/27/94

IRQ Channel and I/O Port Address (AMM-1525M/1510M Only)

Jumper block J10 configures the IRQ channel and I/O

port address for SCSI. The default configuration is

Sound Chip Base Address

Jumper block J9 configures the sound chip base

address. The available settings are

IDE Port Address (AMM-1525M/525M Only)

Pins 3 and 4 of jumper block J4 configures the IDE

port address. The available settings are

A primary and secondary IDE port address is available

for your AMM-1525M/525M. If you are using an

existing IDE controller (the IDE controller may be on

a separate I/O card or on the computer mother-

board; see the computer documentation), and wish

to also use the IDE controller on your AMM-1525M/

525M, select the secondary IDE Port Address. If you

are using only the IDE controller on your

AMM-1525M/525M, select the primary IDE Port

Address.

Pin Pair Description

I2, I1, I0, I9 Determines the host adapter IRQ channel.

IRQ 12 = jumper I2

IRQ 11* = jumper I1

IRQ 10 = jumper I0

IRQ 9 = jumper I9 (not recommended with Windows 3.x)

PRI Determines I/O port address range.

340h-35Eh* = no jumper

140h-15Eh = jumper

* Default configuration

I2 I1 I0 I9 PRI

Extra Jumper

220h (Default) 240h Invalid

Secondary 170h-177h (Default)Primary 1F0h-1F7h

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Adaptec AMM-1510M Guia de Instalação Página 4