Adaptec ULTRA160 Guia do Utilizador

USER’S GUIDEULTRA160 FAMILY MANAGER SET

1-2Ultra160 Family Manager Set User’s GuideDevice DriversThe Ultra160 Family Manager Set has one driver file for each operating system. Use the the ta

1-3IntroductionRequirementsThe following are the minimum and recommended requirements needed to install the Adaptec Ultra160 Family Manager Set: A PC

2-12▼ ▼ ▼ ▼Microsoft Windows NT InstallationThis chapter explains how to install the Adaptec Ultra160 Family Manager Set driver adpu160m.sys for Wi

2-2Ultra160 Family Manager Set User’s GuideInstalling the Driver When Installing Windows NTThe adpu160m.sys driver is not embedded on the Windows NT 4

2-3Microsoft Windows NT InstallationCompleting a Fresh Windows NT 4.0 InstallationFrom CD-ROM1Insert the Windows NT 4.0 CD into the CD-ROM drive.2Star

2-4Ultra160 Family Manager Set User’s GuideInstalling the Driver When Windows NT is Already InstalledTo update or install the adpu160m.sys driver if W

2-5Microsoft Windows NT InstallationUsing Advanced Configuration ParametersAdvanced users may use software parameters to alter the configuration of th

2-6Ultra160 Family Manager Set User’s Guide Maximum SGList — Specifies the maximum number of Scatter/Gather elements. Valid values are 17-255. The da

2-7Microsoft Windows NT InstallationUsing Driver-specific ParametersTo use the Registry Editor to enter adpu160m.sys driver-specific parameters that a

RAdaptec, Inc.691 South Milpitas BoulevardMilpitas, CA 95035© 1999 Adaptec, Inc.All rights reserved. Adaptec, and the Adaptec logo are trademarks of A

2-8Ultra160 Family Manager Set User’s Guide4Click on the adpu160m key.5Select Add Key from the Edit menu; Type Parameters in the Key Name edit box. Le

2-9Microsoft Windows NT InstallationFollow the instructions below to enable Hot-Plug PCI support in the driver:1Insert the Ultra160 Family Manager Set

2-10Ultra160 Family Manager Set User’s GuideUsing Windows NT and the Host AdapterThis section contains useful information on using Windows NT and your

2-11Microsoft Windows NT InstallationSwapping a Host AdapterSwapping an Ultra160 Family host adapter for a non-Ultra160 Family host adapter is similar

2-12Ultra160 Family Manager Set User’s GuideTroubleshootingProblems and SolutionsI made changes to the host adapter configuration and Windows NT no lo

2-13Microsoft Windows NT InstallationError MessagesError messages generated by the adpu160m.sys driver can be viewed by opening the Windows NT Event V

2-14Ultra160 Family Manager Set User’s Guideadpu160m.sys Error MessagesThe following error messages are listed sequentially according to the last thre

2-15Microsoft Windows NT Installation[xxxxx023] Target device parity errorThe driver has detected a parity error by the target device.[xxxxx024] Data

2-16Ultra160 Family Manager Set User’s Guide[xxxxx097] Unable to allocate memoryThis indicates that there may be a problem with the amount of memory i

3-13▼ ▼ ▼ ▼Microsoft Windows 95/98 InstallationThis chapter explains how to install the Adaptec Ultra160 Family Manager Set driver adpu160m.mpd for

R▼ ▼ ▼ ▼ Ultra160 FamilyManager Setfor Windows NT, Windows 95/98,Novell NetWare, and SCO UnixWareUser’s Guide

3-2Ultra160 Family Manager Set User’s GuideDOS Drivers for CD-ROM AccessThe CD-ROM drivers need to be installed only if DOS access to a CD-ROM drive a

3-3Microsoft Windows 95/98 InstallationNote: This will assign the CD-ROM to the next available drive letter, typically D if there is only one DOS driv

3-4Ultra160 Family Manager Set User’s GuideInstalling the Driver When Installing Windows 95/98Installing the Driver When Installing Windows 95Note: Fo

3-5Microsoft Windows 95/98 InstallationInstalling the Driver When Installing Windows 98You will need to update the Windows 98 Boot disk that came with

3-6Ultra160 Family Manager Set User’s GuideInstalling the Driver When Windows 95/98 isAlready InstalledTo update or install the adpu160m.mpd driver if

3-7Microsoft Windows 95/98 Installation8Click Change Driver. If you are prompted to select the hardware type, select SCSI Controller.9Click the Have D

3-8Ultra160 Family Manager Set User’s GuideTroubleshootingProblems and SolutionsWhat is a miniport driver, and how do I make sure that the miniport dr

3-9Microsoft Windows 95/98 Installation7You must restart your computer for the changes to take effect.What if a yellow exclamation mark or a red X app

3-10Ultra160 Family Manager Set User’s GuideIf I am running under Windows 95/98, do I need lines for the Adaptec Real Mode ASPI drivers and mscdex.exe

3-11Microsoft Windows 95/98 InstallationMy CD-ROM drive shows up as more than one icon under My Computer.The mapping between mscdex.exe, which runs in

iiCopyright© 1999 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in an

4-14▼ ▼ ▼ ▼Novell NetWare InstallationThis chapter explains how to install the Adaptec Ultra160 Family Manager Set driver adpt160m.ham for Novell N

4-2Ultra160 Family Manager Set User’s GuideInstalling the Driver When Installing NetWareTo install the adpt160m.ham driver when you install NetWare, f

4-3Novell NetWare Installation8Change directory to c:\server.312, and copy the nwpa_up.exe patch file to the directory.9Run nwpa_up.exe (this will cre

4-4Ultra160 Family Manager Set User’s Guide18Create the autoexec.ncf file. Add the following lines and then save the file.load after311load c:\server.

4-5Novell NetWare InstallationNetWare 4.12/4.2 Follow these instructions only if you are installing NetWare 4.12/4.2 for the first time:1Begin install

4-6Ultra160 Family Manager Set User’s GuideNetWare 5.0Follow these instructions only if you are installing NetWare 5.0 for the first time:1Begin insta

4-7Novell NetWare InstallationInstalling the Driver When NetWare is Already InstalledTo update or install the adpt160m.ham driver when NetWare is alre

4-8Ultra160 Family Manager Set User’s GuideLoading the Driver at Server BootupTo automatically load the adpt160m.ham at server bootup, the startup.ncf

4-9Novell NetWare InstallationUsing the Load Command Line OptionsYou can specify several command line options when the driver is loaded. The available

iii▼ ▼ ▼ ▼ Contents1 IntroductionDevice Drivers 1-2Adaptec Ultra160 Family Host Adapters 1-2Requirements 1-32 Microsoft Windows NT InstallationI

4-10Ultra160 Family Manager Set User’s Guidelun_enable=10-FF 01 A bit mask to enable scanning for specific LUNs on all targets. The default value of 0

4-11Novell NetWare InstallationBit Mask OptionsUse the example below as an aid for calculating Bit Mask option hex values. Each SCSI device is enabled

4-12Ultra160 Family Manager Set User’s GuideUsing NetWare and the Host AdapterThis section contains useful information on using NetWare and your host

4-13Novell NetWare InstallationMount StatusMounting causes a drive to come on-line as a NetWare storage device. Dismounted drives are inactive and can

4-14Ultra160 Family Manager Set User’s Guide2When sbackup is loaded, it asks for a login name. Enter the appropriate name.3If sbackup asks you to sele

4-15Novell NetWare Installation3Enter the following line at the prompt and then note the number and name of the CD::cddevicelist4Enter the number or v

4-16Ultra160 Family Manager Set User’s GuideTroubleshootingError MessagesThe error messages listed below are the messages associated with the adpt160m

4-17Novell NetWare Installation[xxxxx085] Unable to allocate memory This indicates that there may be a problem with the amount of memory installed in

4-18Ultra160 Family Manager Set User’s Guide[xxxxx0a4] SCSI bus reset by third party hardwareHardware such as an array enclosure may have reset the SC

5-15▼ ▼ ▼ ▼UnixWare InstallationThis chapter explains how to install the Adaptec Ultra160 Family Manager Set drivers adst21 and adst70 for UnixWare

ivUltra160 Family Manager Set User’s Guide3 Microsoft Windows 95/98 InstallationDOS Drivers for CD-ROM Access 3-2Install CD-ROM Drivers on a DOS Boota

5-2Ultra160 Family Manager Set User’s GuideInstalling the Driver When Installing UnixWareTo install either the adst21 or adst70 driver at the same tim

5-3UnixWare InstallationInstalling the Driver When UnixWare is Already InstalledTo update or install the adst21 driver or adst70 driver on a system wh

5-4Ultra160 Family Manager Set User’s GuideBack Up the ComputerIf you have not already done so, back up all important files on the computer. See your

5-5UnixWare Installation5Type pkginfo -l adstxx and press Enter.6Verify that the adst21 or adst70 driver is now listed. If the adst21 or adst70 drive

5-6Ultra160 Family Manager Set User’s GuideRebuild the UnixWare KernelTo rebuild the UnixWare kernel with the new changes, follow these steps:1Type th

5-7UnixWare InstallationUsing UnixWare and the Host AdapterThis section contains useful information on using UnixWare and your host adapter.Using Tuna

5-8Ultra160 Family Manager Set User’s GuideRemoving the DriverIf you no longer need the adst21 or adst70 driver, you can use the following procedure t

5-9UnixWare InstallationTroubleshootingProblems and SolutionsMy computer crashes or displays panic messages during the bootup procedure!You may have t

5-10Ultra160 Family Manager Set User’s GuideError MessagesThe error messages listed below are the messages associated with the drivers. Messages are l

5-11UnixWare Installation[xxxxx015] Error issuing commandAn error has occurred with the driver. Try installing the most up-to-date version of the driv

vContents5 UnixWare InstallationInstalling the Driver When Installing UnixWare 5-2Installing the Driver When UnixWare is Already Installed 5-3Back Up

5-12Ultra160 Family Manager Set User’s Guide[xxxxx041] Command aborted[xxxxx042] Command aborted[xxxxx043] Command aborted [xxxxx044] Command aborted

5-13UnixWare Installation[xxxxx096] Adapter hardware initialization failure - possible resource conflictThe driver has attempted to initialize the ada

Index-1▼ ▼ ▼ ▼ IndexAAHA-3960D 1-2AIC-7892 1-2AIC-7899 1-2aspi8u2.sys 3-2aspicd.sys 3-2autoexec.bat 3-2BBackup 4-13Bit mask options 4-9, 4-11Boo

Ultra160 Family Manager Set User’s GuideIndex-2NNetWareadaptec.nlm 4-14adpt160m.ham 1-2, 4-1, 4-2, 4-6, 4-11, 4-16backup 4-13bit mask options 4-9CD-RO

Index-3IndexWWindows 95/98adpu160m.mpd 1-2device manager 3-8driver installation 3-4–3-7miniport driver 3-8troubleshooting 3-8–3-11Windows NTadpu160m.s

1-11▼ ▼ ▼ ▼IntroductionThe Adaptec® Ultra160 Family Manager Set is a set of software drivers and other files that enable your Adaptec Ultra160 Fami