Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Guia de Instalação descarregar pdf (Página 21)

Using the Adaptec SCSI Card 19160 and SCSI Devices

Installing Multiple SCSI Cards

■

You can install multiple SCSI cards in your computer; you are

limited only by the available system resources (for example,

IRQ settings, I/O port addresses, BIOS addresses, and so forth)

and the systems ability to share them.

■

Each SCSI card you install forms a separate SCSI bus with a

different set of SCSI devices. SCSI IDs can be reused as long as

the ID is assigned to a device on a different SCSI card (for

example, each SCSI card can have a device with SCSI ID 2).

■

If you have two or more SCSI cards and your computer boots

from a SCSI disk drive, leave the SCSI card BIOS enabled on the

SCSI card to which the boot disk drive is connected. Disable the

SCSI card BIOS on the other SCSI card(s).

Note:

Drives not under SCSI BIOS control will not be

accessible in the operating system unless the correct

drivers are loaded. See the SCSI card’s documentation

for instructions on loading its drivers.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 37 38

Sem comentários

Adaptec 19160 - SCSI Card Storage Controller U160 160 MBps Guia de Instalação Página 21