RINSTALLATIONGUIDE (OEM)ADAPTEC SCSI CARD 39160ULTRA160 SCSI CONTROLLER39160_OEM_InsGd.book Page 1 Thursday, October 14, 1999 10:18 AM
8Installation GuideConnecting Wide SCSI DevicesYou can connect Wide SCSI devices to the internal LVD/SE con-nectors. If you do this, we recommend that
9Adaptec SCSI Card 39160Connecting Internal Ultra/Fast Narrow SCSI DevicesIf you have internal Ultra/Fast Narrow SCSI devices with stan-dard 50-pin co
10Installation GuideConnecting External SCSI DevicesYou can connect external Ultra160 and Ultra2 SCSI devices to the 68-pin external LVD/SE SCSI conne
11Adaptec SCSI Card 39160Connect the other end of the cable to a SCSI connector on the back of an external device. If you are installing only one exte
12Installation GuideConnect power cables to all external device(s) and to the computer.The last SCSI device on the end of each SCSI bus cable must be
13Adaptec SCSI Card 39160If you have any problems while installing the Adaptec SCSI Card 39160, check the following items first:•Are all SCSI devices
14Installation GuidePre-Loaded Adaptec DriversIf the Adaptec SCSI Card 39160 was included as part of a com-puter system you purchased, the system alre
Copyright© 1999 Adaptec, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interf
39160_OEM_InsGd.book Page 17 Thursday, October 14, 1999 10:18 AM
39160_OEM_InsGd.book Page 2 Thursday, October 14, 1999 10:18 AM
© 1999 Adaptec, Inc. All rights reserved.Printed in SingaporeStock No.: 512465-03, Rev. A KL 10/99(SRC: 512465-00, Ver. AA)RWe move the information th
1The Adaptec SCSI Card 39160 enables you to connect up to 30 SCSI devices—such as very large arrays of high-performance HDDs, external storage subsyst
2Installation GuideSupport for Older SCSI DevicesWe recommend that if you have single-ended Ultra SCSI and ear-lier SCSI devices you connect them to C
3Adaptec SCSI Card 39160Discharge any static electricity build-up before handling your SCSI card by touching a grounded metal object (like the exposed
4Installation GuideComputers may have vertical or horizontal expansion slots. Refer to your computer manual to locate the PCI slots. If your com-puter
5Adaptec SCSI Card 39160Below are some guidelines for setting SCSI IDs and termination on your devices. Refer to the Adaptec SCSI Card 39160 User’s Re
6Installation GuideYou can connect a total of 30 SCSI devices to the Adaptec SCSI Card 39160,with up to 15 devices on each SCSI channel. Before connec
7Adaptec SCSI Card 39160Plug the non-terminated end of the cable(s) to the internal LVD/SE connector(s).Plug the internal Ultra160 and Ultra2 SCSI dev
Comentários a estes Manuais