Adaptec 39160 Guia de Instalação descarregar pdf (Página 3)

The Adaptec SCSI Card 39160 enables you to connect up to 30

SCSI devices—such as very large arrays of high-performance

HDDs, external storage subsystems, clustered configurations,

Ultra160 hard disk drives, scanners, and CD-ROM drives—to

any Intel-based computer with 64- or 32-bit PCI expansion slots.

The Adaptec SCSI Card 39160 has two independent SCSI chan-

nels, each with a maximum throughput of 160 MBytes/sec. SCSI

Channel A (marked “CH 1/A” on the card) has two internal con-

nectors and one external connector. SCSI Channel B (marked

“CH 2/B” on the card) has one internal and one external

connector.

You can connect Ultra160 and Ultra2 SCSI devices to the 68-pin

Low Voltage Differential/Single-Ended (LVD/SE) connectors on

both SCSI channels. Or you can operate the newer Ultra160 and

Ultra2 devices at their maximum speed on Channel B while at

the same time using legacy SCSI devices on Channel A.

Although the Adaptec SCSI Card 39160 is a 64-bit PCI card, it

also works in a 32-bit PCI slot. When installed in a 32-bit PCI

slot, the card automatically runs in the slower 32-bit mode.

This installation guide explains how to

•

Install the Adaptec SCSI Card 39160

•

Set up SCSI devices

•

Connect SCSI devices

NTRODUCTION

68-pin internal LVD/SE

connector Channel A

68-pin internal LVD/SE

connector Channel B

68-pin external

LVD/SE connector

Channel B

68-pin external

LVD/SE connector

Channel A

Narrow

connector

39160_OEM_InsGd.book Page 1 Thursday, October 14, 1999 10:18 AM

1 2 3 4 5 6 7 8 ... 19 20

Sem comentários

Adaptec 39160 Guia de Instalação Página 3