Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Guia do Utilizador descarregar pdf (Página 70)

70 Enhanced OS-9 for X86 PCAT

Installing and Configuring Enhanced OS-9

Find the following lines:

#define LLE509_PORT_ADDRESS0x340

#define LLE509_IF_VECTOR0x43

#define ETH_CIS_PARAMS"3com=0x340,3"

The above port addresses and/or IRQ information should be changed

as required by the system. For IRQ 10, here are the changes required:

#define LLE509_PORT_ADDRESS0x340

#define LLE509_IF_VECTOR0x4a

#define ETH_CIS_PARAMS"3com=0x340,10"

The Wizard will automatically re-make the cnfgdata module.

DEC 21140

System State Debugging - Not Supported

Cards Supported

SMC EtherPower 10/100 - SMC9332DST

SMC EtherPower 10/100 - SMC9334BDT/SC (Dual)

Intra Server DE504-BA (Quad)

Asante’ Fast 10/100

D-Link DFE-500TX ProFast 10/100 Adapter

Default Settings

PORTADDR NA

IRQVECTOR NA

CONNTYPE INF_UTP

Solving Configuration Issues

Connection Type

The default connection type is set to INF_AUI. For the SMC EtherPower

10/100 card this actually is the RJ45 connector. If you are unable to

communicate with this card and

netstat -in

shows the device, the

connection type may be incorrect. To correct it, you must change the

OS-9 device descriptor field that indicates the type of connection in use.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 156 157

Sem comentários

Adaptec 1542CP - Storage Controller Fast SCSI 10 MBps Guia do Utilizador Página 70