Adaptec USB2connect Host Bus Adapter Manual do Utilizador descarregar pdf (Página 2)

2 of 9

If you experience any of these problems you must purchase a powered USB card in order to

communicate with the GERBER EDGE/EDGE 2 via USB-to-Parallel cable.

♦ Laptop computers: externally powered PCMCIA card with 2 USB ports

♦ Desktop computers: PCI card with 2 USB ports

Tip: Gerber has had success with the following USB cards. You may have success with other

manufacturer's cards.

Belkin

USB 2.0 PCI card

Adaptec

USB2connect 2000

CompUSA

2 Port USB 2.0 PCI Expansion Card

Compaq

2 Port USB 2.0 PCI Host Card

GERBER EDGE and Third-party USB-to-Parallel Cables

GERBER EDGE 2 is NOT compatible with third-party USB-to-Parallel cables and is only tested

and supported with the custom Gerber USB-to-Parallel cable included in this kit.

The GERBER EDGE MAY be compatible with third-party USB-to-Parallel cables available from

local computer stores. See instruction for installing a third-party cable for a GERBER EDGE in a

separate document.

If you are using a third-party USB-to-Parallel cable, GQ Manager requires an update to enable

the USB port option. The update is available from the GSP website:

www.gspinc.com/support/downloads/software.html.

Connecting the GERBER EDGE/EDGE 2 via the Gerber USB-to-Parallel Cable

The following steps summarize the process of installing and connecting the GERBER

EDGE/EDGE 2 using the USB-to-Parallel Cable:

1 Insert the USB-to-Parallel Cable Update CD into the CD and use the Setup Wizard to

automatically install the updates to GQ Mgr.exe and G32Setup.dll.

2 Connect the USB-to-Parallel cable to the GERBER EDGE/EDGE2 and computer.

3 Use the Found New Hardware Wizard to install the Gerber USB driver located on the

USB-to-Parallel Installation CD.

Note: GSP has found that you may have to install the driver twice in order to have Windows

accept it. If you get a "Cannot Start this Hardware" message after the initial installation, delete

and reinstall the driver as directed in this procedure. Usually after the reinstallation, the driver

is accepted.

4 Install the GERBER EDGE/EDGE 2 via a USB port.

To install the GQ Manager and G32 Setup software updates

1 Close any Windows or applications that are running including GSPTray and any virus

scan software.

1 2 3 4 5 6 7 8 9

Sem comentários

Adaptec USB2connect Host Bus Adapter Manual do Utilizador Página 2