Adaptec SATA AND SCSI RAID CONTROLLERS Manual do Utilizador descarregar pdf (Página 35)

2-7

Installing the Controller and Drives

Using the Adaptec Installation CD

Note: SCSI only—You cannot create the RAID using a CD drive

connected to the RAID controller.

To build a bootable RAID 5 array using the Adaptec installation CD:

1 Install the controller and drives, as described in Installing the

Controller and Drives on page 2-3.

2 Start or restart the computer.

3 Insert the Adaptec installation CD.

Note: If the installation CD does not start automatically,

you may need to enter system Setup and enable booting

from the CD. For details, refer to your computer’s

documentation.

4 Select the appropriate language on the Language screen, then

press Enter. Read the information on the Licenses screen, then

press Enter again.

The Adaptec installation CD main menu is displayed.

5 Select the option Launch Configuration Utility.

The system launches Adaptec Storage Manager. The Storage

Manager screen appears.

6 Click Create.

7 In the configuration wizard, select Custom.

8 Click the RAID 5 button, then click Next.

9 Click at least three drives to be used in your array.

Each drive you select is marked with a check.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 164 165

Sem comentários

Adaptec SATA AND SCSI RAID CONTROLLERS Manual do Utilizador Página 35