Adaptec APA-358 Guia de Instalação descarregar pdf (Página 10)

APA-358A MiniSCSI-2 Installation Guide

Part Number: 510809-00, Rev. A

Print Spec Number: 493477-00

Current Date: 4/11/95 ECN Date: 4/1195

termination power and may need to obtain an AC

adapter (see Termination Power on page 4).

■ Make sure the SCSI bus is properly terminated.

■ Make sure all SCSI devices have unique SCSI IDs.

■ Make sure you are not trying to boot from a

device on the MiniSCSI-2. (A computer cannot

boot from a device connected to the parallel port.)

■ Make sure the parallel port address is 278h or 378h.

If it is 3BCh, the parallel port cannot be used in

EPP mode. In this case, change the port address to

278h or 378h, or change the /M

(mode configu-

ration) option for

ma358.sys

to a non-EPP mode

(see ma358.sys Options on page 7).

Error Messages

The Adaptec EZ-SCSI drivers and ASPI manager dis-

play error messages if they detect a problem when

the computer boots. For information on most error

messages, see Adaptec EZ-SCSI User’s Guide. The fol-

lowing messages are not described in that user’s

guide.

No SCSI Host Adapter detected

The MiniSCSI-2 requires SCSI termination power to

operate. Turn

ON the SCSI devices. If the LED on the

MiniSCSI-2 does not light, you do not have termina-

tion power. You may need to obtain an AC adapter

(see Termination Power on page 4).

Host Adapter detected. Warning: No devices respond on

this host adapter

If you receive this message, the mode setting for

ma358.sys

is probably incorrect:

■ If you are using a mode other than Auto-detect,

try using Auto-detect (/M

, where

=0). This

should automatically configure the MiniSCSI-2 for

your parallel port type. To change to Auto-detect

mode, see ma358.sys Options on page 7.

■ If you are using Auto-detect mode (

=0), the

Auto-detect feature may not have properly

detected the port type. Try turning the computer

OFF and then ON again. If you still receive the

error message, try setting

to 2 or 4 (see

ma358.sys Options on page 7).

1 2 ... 5 6 7 8 9 10 11 12 13 14

Comentários a estes Manuais

Sem comentários

Adaptec APA-358 Guia de Instalação Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Conversores em série Adaptec APA-358