Adaptec AAR-21610SA Manual do Utilizador descarregar pdf (Página 4)

README.TXT

- Performing a Verify and Verify/Fix on an RAID 10 displays the

same message text in the event log, "Build/Verify started on

second level array of array 'Array_0.'" You may see the message

three times for a Verify, but only once for a Verify/Fix.

- Adaptec 2020ZCR/2120S/2200S only -- RAID 10 arrays with greater

than 20 drives support the Build/Verify command, but not the

Clear command.

4.2 RAID 50 Notes

- Adaptec 2020ZCR/2120S/2200S only -- RAID 50 arrays with greater

than 18 drives support the Build/Verify command, but not the

Clear command.

--------------------------------------------------------------------

5. Controller-Specific Compatibility Issues

5.1 SATA Controllers

- A Clear operation on an array causes a severe performance impact

to other processes, such as Build/Verify processes, involving the

same array members. Therefore, Adaptec recommends that you NOT

attempt any other operations while performing a Clear operation

on a SATA array.

- SATA events are displayed with SCSI nomenclature.

- Adaptec 2810SA/21610SA only -- ACU is not supported on these

controllers when installed in the following motherboards:

o SuperMicro P40C6+/P4DCE Server Board, 512 MB DDR RAM

o Intel Xeon x 2 System BIOS rev: 1.26

WORKAROUND: Use Adaptec Storage Manager on the bootable CD to

create arrays.

5.2 SCSI Controllers

- In Linux, the controller does not support attached CD drives

during OS installation.

- Adaptec 2020ZCR/2120S/2200S only -- RAID 10 arrays with greater

than 20 drives and RAID 50 arrays with greater than 18 drives

support the Build/Verify command, but not the Clear command.

- Adaptec 2120S only -- When you flash this controller, the

confirmation message says "Writing 2200S firmware (4MB) to the

Controller..." The model number and size are incorrect. (The

message should say "Writing 2120S firmware (2MB) to the

Controller...") However, the flash process is successful.

--------------------------------------------------------------------

6. Adaptec Bootable CD

6.1 Intel SATA chipset compatibility

- The Adaptec bootable CD will not boot when connected to motherboards

equipped with the Intel ICH5 SATA I/O device.

Page 4

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Adaptec AAR-21610SA Manual do Utilizador Página 4

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec AAR-21610SA