Adaptec RAID 2810SA Guia de Instalação descarregar pdf (Página 9)

If you install the Adaptec 2810SA in a 64-bit slot on an

IBM E-Server XSeries 220 systems, you may experience

problems booting. When installed in a 64-bit slot and the

on-board SCSI controller is enabled, the system freezes

when POST scans the Adaptec 2810SA. The controller card's

banner displays, immediately followed by BIOS NOT INSTALLED,

and the system freezes. Controller card settings do not have

any effect on the failure. To resolve the problem, either

install the Adaptec 2810SA in a 32-bit slot or disable the

onboard SCSI controller.

On the IBM Netfinity 5000, the system generates many

Event 9's. The system will contiunue to operate normally.

However, to avoid filling up the event log, Adaptec

recommends deleting them.

9.5. Microstar

On the Microstar MS-6321, do not install the Adaptec 2810SA

into the PCI 5 slot. Using this slot may result in a system

POST error in which the system stops responding to user

input after displaying the "Controller Started" message.

9.6. Tyan Trinity 400

On these motherboards running Windows Server 2003 (and

possibly other Windows systems), the Adaptec 2810SA can

not be installed in Slot #5 or Slot #6. Also, on Windows

Server 2003 (and possibly other Windows versions), the

Adaptec 2810SA fails to boot from other devices if

installed in either Slot 5 or Slot 6.

9.7 SOYO KT333 Dragon Ultra

The Adaptec 2810SA driver can not coexist wih the

sound driver (system's onboard C-Media 8738). The

system reboots then locks up when the OS is started.

Either do not install the sound driver or disable

sound hardware in the system's BIOS.

9.8 SuperMicro

The Adaptec 2810SA does not support Mode 0 flash on the

SuperMicro P3T-DDE motherboard.

--------------------------------------------------------------------

publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical,

photocopying, recording or otherwise, without prior written consent

of Adaptec, Inc., 691 South Milpitas Blvd., Milpitas, CA 95035.

1 2 3 4 5 6 7 8 9

Sem comentários

Adaptec RAID 2810SA Guia de Instalação Página 9