Adaptec AHA-1520A Guia de Instalação descarregar pdf (Página 5)

AHA-1510A Install Guide

Part Number: 510399-00, Rev. A

Print Spec Number: 491841-00, Rev. A

Current Date: 4/7/93 ECN Date: 4/13/93

Booting the Computer

The AHA-1510A does not provide booting capabil-

ity. If you want to boot from a SCSI drive installed

on the host adapter, you can install an AHA-1520A

or AHA-1522A. Both of these host adapter models

provide booting capability.

Software Installation

DOS/Windows Platforms

If you have purchased Adaptec EZ-SCSI, insert the

EZ-SCSI diskette in a floppy diskette drive, change

to the drive letter of that drive (either A or B) and

enter the command install. If you do not have

EZ-SCSI, follow the instructions below for DOS

installation.

Use the DOS

copy

command to copy the files from

the ASW-1210 diskette to the root directory of

drive

C. Using any text editor, add these two lines

to your

config.sys

file:

device = aspi2dos.sys /z /y- /u- /d

device = aspidisk.sys /d

Enter the lines in this order, or else the programs

will not be installed when you boot your computer.

You may also need to add the following command

line options to the device driver lines in the

config.sys

file. (See the ASW-1210 Installation

Guide for more information about these options.)

device = aspi2dos.sys [/p<

port address

>] [/L]

[/c

/c-] [/y

/y-] [/u

/u-]

[/h<

HA SCSI ID

>] [/q<

interrupt channel

If you change the port address or the interrupt

channel, you must also change the corresponding

jumper block settings.

If a hard disk drive is attached to the AHA-1510A,

you must use the

aspidisk

driver to access the disk.

You must use the

afdisk

utility to format and parti-

tion SCSI disk devices.

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Adaptec AHA-1520A Guia de Instalação Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com não Adaptec AHA-1520A