Adaptec ASC39320A-ROHS-KIT Guia do Utilizador descarregar pdf (Página 52)

3-11

Configuring the Adaptec SCSI Card with SCSISelect

■ Support Removable Disks Under INT 13 as Fixed Disks—

(Default: Disabled) Determines which removable-media drives

are supported by the SCSI card BIOS. The options are as

follows:

■ Disabled— No removable-media drives running under

DOS are treated as hard disk drives. Software drivers are

required because the drives are not controlled by the BIOS.

Caution: You may lose data if you remove a removable-

media cartridge from a SCSI drive controlled by the

SCSI card BIOS while the drive is on. If you want to be

able to remove the media while the drive is on, install

the removable-media software driver and set Support

Removable Disks Under BIOS as Fixed Disks to

Disabled.

■ Boot Only—Only the removable-media drive designated as

the boot device is treated as a hard disk drive.

■ All Disks—All removable-media drives supported by the

BIOS are treated as hard disk drives. This setting has no

effect on drives under NetWare because NetWare

automatically supports removable-media drives as hard

disk drives.

Note: The Boot Only and All Disks options are available

only if the SCSI Controller BIOS option is enabled.

■ BIOS Support for Bootable CD-ROM—(Default: Enabled)

When set to Enabled, the SCSI card BIOS allows the computer

to boot from a CD-ROM drive. If booting from a hard disk or

other device, make sure no bootable CD is inserted, or disable

this option.

HostRAID Options

HostRAID—When set to Enabled, the user can create and

maintain RAID arrays. To enable HostRAID functionality and use

it to manage RAID arrays, see Chapter 4, Using the SCSISelect

Utility to Manage Arrays.

U320 UG.book Page 11 Tuesday, September 23, 2003 1:47 PM

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 205 206

Sem comentários

Adaptec ASC39320A-ROHS-KIT Guia do Utilizador Página 52