Adaptec RAID 2810SA Guia do Utilizador descarregar pdf (Página 81)

B-16

DOS Utilities

Select a drive and press the

Insert

key to assign the drive as a spare.

The specified drive is displayed in the Assigned Hotspares

Drives list.

4 Press Enter to save the spare drive assignment. The following

prompt is displayed:

Have you finished managing Hotspare drives?

5 Press Y (for yes) to return to the Main menu.

Removing Hot Spare Drives

To remove an assigned spare drive from an array:

1 Select Manage Arrays from the Main menu.

2 From the List of Arrays dialog box, select the array you want to

remove the assigned spare drive from and type Ctrl+S.

The Hotspare Management for Array dialog box is displayed; it

shows which drives can be assigned as spare drives and a list of

drives that are already assigned as spare drives.

3 From the Assigned Hotspares drives list, select the drive to be

removed and then press Delete to remove the drive as a spare.

The specified drive is displayed in the Select Hotspares Drives list.

4 Press Enter to save the removed spare drive assignment. The

following prompt is displayed:

Have you finished managing Hotspare drives?

5 Press Y (for yes) to return to the Main menu.

Initializing a Hard Drive

You must initialize a drive before you can use it as part of an array.

You can tell a drive is not available (and must be initialized) if it is

not listed in the disk selection list or if it is listed but grayed out.

Caution:

Initializing a disk deletes all data on the disk. (Actually,

it overwrites the partition table on the disk and makes all the

previous data on the disk inaccessible.) If the drive is a member

of an existing array, you might not be able to use that array again.

Do not

initialize a disk that is part of a boot array (numbered 00 in

the List of Arrays dialog box). See

Viewing Array Properties

page B-15 for information on determining which disks are

associated with a particular array.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 152 153

Sem comentários

Adaptec RAID 2810SA Guia do Utilizador Página 81