Adaptec 1891300 - RAID Controller Guia do Utilizador descarregar pdf (Página 59)

Chapter 8: Installing the Driver on an Existing Operating System ● 59

Installing on UnixWare

To install the driver on UnixWare:

1 Start your computer, then insert the driver disk.

2 Begin the driver package installer:

pkgadd -d diskette1

3 At the installer prompt, type

4 Select 1 for the aacraid package.

5 When the installation is complete, select q to quit the installer.

6 Reboot your computer and remove the driver disk.

7 Continue with Managing Your Storage Space on page 61.

Installing on VMware

Note: The embedded driver provided by VMware should be suitable for most applications. If an

updated driver is needed, use the following procedure.

To install the driver on VMware:

1 Start your computer, then insert the driver disk.

2 At the console screen of the VMware server, mount the Adaptec CD:

mount –r /dev/cdrom /mnt/cdrom.

3 Install the module RPM:

rpm –ivh /mnt/cdrom/xxx/yyy.rpm

where

xxx

is the driver path, and

yyy.rpm

is the rpm file.

4 Reboot your computer and remove the driver disk.

Note:

Currently, Adaptec Storage Manager is not supported on VMware. To create and manage

arrays, use the

ARC utility. See page 63 for more information.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 136 137

Sem comentários

Adaptec 1891300 - RAID Controller Guia do Utilizador Página 59