Adaptec 2920C - AHA Guia de Instalação descarregar pdf (Página 2)

Introduction

This installation guide provides the instructions needed to install and

use your new SCSI host adapter. Once you have performed the simple

installation steps listed on pages 2 through 6, your host adapter and

SCSI devices are ready for operation.

We recommend that you keep this installation guide with your impor-

tant computer documents. One of the benefits of SCSI is that you can

connect as many as seven peripherals to your host adapter. If you are

not connecting the full complement of seven peripherals during your

initial installation, when the time comes to add another peripheral,

this guide will help with that installation.

Host Adapter BIOS

Provides booting capabilities from up 

to seven SCSI hard disk drives 

(under DOS 5.0 and above).

LED Connector

Connects to the computer's

LED cable to display activity

on the SCSI bus.

Internal SCSI-2 Connector

Uses a 50-pin internal SCSI ribbon

cable to connect up to seven internal

SCSI devices.

External SCSI-2 Connector

Uses 50-pin high-density external SCSI cables 

to daisy-chain up to seven external devices.

AHA-2920 Host Adapter

Contents

Installation and Setup

Installation Steps . . . . . . .2 - 6

Helpful Hints

Using Your Host Adapter . 6

Modifying PCI Parameters 7

Connecting to the LED

Connector . . . . . . . . . . . . . 7

Need Assistance?

Troubleshooting Checklist . 8

Common Problems and

Solutions . . . . . . . . . . . . . . 8

1 2 3 4 5 6 7 ... 10 11

Sem comentários

Adaptec 2920C - AHA Guia de Instalação Página 2