Adaptec 2200S - SCSI RAID Controller Guia de Instalação descarregar pdf (Página 28)

2-9

Installing The Controller

Creating a RAID 5 Without an Operating System

This part of the Installation Guide provides a quick installation of a

RAID 5 system with the minimum three drives attached to

channel 0 of an Adaptec SCSI RAID 2200S controller. Details will

not be offered, and optional parameters or selections along the way

will not be explored. For more details, please consult the Adaptec

SCSI RAID Software User’s Guide included on the CD.

This quick installation also assumes that the controller card and

drives have been installed. Two installation scenarios will be

presented, one using the ARC utility that is embedded on the

controller card. When using ARC to construct an array, the system

will require a keyboard and display.

The other method will be to use the CD to construct the RAID 5 by

using the boot capability of the CD. This will also be done directly

on the Managed System using a keyboard, mouse, and display.

Using the Adaptec RAID Configuration (ARC) Utility

Start or restart the system. Press CTRL-A when the display

indicates the Adaptec SCSI RAID controller is being started by

displaying lines of text starting with:

Adaptec SCSI RAID. . .

A blue-background screen appears with the title Adaptec 2xx0S

RAID Controller SCSISelect Utility. Press Enter since the

desired Array Configuration Utility is highlighted by default.

Note:

If more than one controller of the Adaptec SCSI

RAID 2120S/2200S family is installed, the first screen will

show the controllers present. Highlight the controller you

wish to use and press Enter to get to the screen in this step.

The Array Configuration Utility screen appears. Using the

arrow keys, highlight Initialize Drives, then Enter.

Note:

All drives being used in an array or volume must be

initialized.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 66 67

Sem comentários

Adaptec 2200S - SCSI RAID Controller Guia de Instalação Página 28