Adaptec 1744 Guia de Instalação descarregar pdf (Página 14)

Section Two

NetWare 386 v3.1 Installation

Note:

installing more than one host adapter. each host adapter should have its own

SCSI bus. For example. no

two

AHA-1540s should

connected to the same SCSI

cable.

The NetWare 386 prompt (":") will now be displayed. Use the

LOAD

command to

install the driver. The correct syntax to load the AHA-I 540/1542 driver is:

:load

[path]

aha1540

[options]

Note that this driver is used for the AHA-1740/1744 running in standard mode.

For

the AHA-I640:

:load

[path]

aha1640

[options]

For

the AHA-1740/1744:

:load

[path]

aha1740

[options]

Note that the AHA-1740 driver is required only when running the EISA AHA-1740/1744

in enhanced mode.

In standard mode, use AHA1540.DSK.

The module "ASPITRAN.DSK" also needs to reside in the same "[path]."

For

an AHA-1540/1542, assuming the ASW-1440 v3.0 diskette is in drive A:. the screen

will look similar to:

:load

a:\net386.31\aha1540

<ENTER>

module

AHA1540.DSK

Auto-loading

Module

ASPITRAN.DSK

AHA-154x/1640 ASPI Manager & SCSI

Disk

Module

For

NetWare

386

v3.1

Version

2.0

1990

Adaptec,

Inc.

Supported

I/O

port

values

are

330,

334,

234,

230,

134,

130

I/O

port:

330

<ENTER>

automate this procedure, the user can type: "load a:\net386.31\aha1540 port=xxx"

where 'xxx' is the host adapter's port location.

Note that those port values which would cause a conflict wlth another device will

NOT

displayed.

ASW-1440

2-2

adoptee

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 79 80

Comentários a estes Manuais

Sem comentários

Adaptec 1744 Guia de Instalação Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec 1744