Adaptec 1744 Guia de Instalação descarregar pdf (Página 75)

Section Four

NetWare 286 v2.15 Installation

AHA154x/1640

Host

Adapter

not

idle

while

trying

reset

interrupt.

AHAl54x/l640

Can't

send

byte

due

Command/Data

port

still

FULL.

AHA154x/1640

Can't

get

byte

due

Data

port

not

FULL.

AHAl54x/1640

configuration

data

contains

DMA

channel.

AHA154x/1640

configuration

data

contains

interrupt

channel.

AHA154x/1640

INQUIRY

command

Completed

with

Error

Time

Out.

AHAl54x/1640

Test

Unit

Ready command

Completed

with

Error

Time

Out.

AHA154x/1640

READ

CAPACITY

command

Completed

with

Error

Time

Out.

AHA154x/1640

Host

Adapter

Not

Configured

proper

port

address.

AHA154x/1640

Host

Adapter

Not

Configured

proper

interrupt

channel.

AHA154x/1640

Host

Adapter

Not

Configured

proper

DMA

channel.

The following are the reasons that these errors may occur:

The AHA-1540/1542/1640/1740/1744 hardware settings

not match the

configuration option selected during NETGEN. Check the jumpers on the AHA-

1540/1542

the POS setting

the AHA-1640.

There is a hardware conflict between

the

host adapter and another card in the

system. Check the

port

address, DMA channel and interrupt channel

other I/O

cards in the system. Some

VGA

cards and some

LAN

cards use port address 330H,

the default port address

the AHA-I540/1542/1640/1740/1744.

3. The SCSI

bus

isn't properly terminated. Only the devices

the end

the SCSI

bus should be terminated. The host adapter is considered a SCSI device and has on-

board terminators that can

removed

both the internal and external connectors

are

used.

There is a SCSI ID conflict

the SCSI bus. Each device

the SCSI bus

should

assigned a unique SCSI !D. SCSI IDs range between 0 and 7. The

default host adapter SCSI ID is 7. Check the SCSI IDs

every device on the

SCSI bus to ensure that each has a unique SCSI ID.

5. The AHA-1540/1542 is malfunctioning. One quick way

check this is to boot

OOS under it:

it runs OOS,

probably isn't a hardware failure.

The drive does not work with this host adapter. Again, check this under DOS.

it works with DOS,

should work with NetWare 286.

ASW-1440

4-27

adoptee

1 2 ... 70 71 72 73 74 75 76 77 78 79 80

Comentários a estes Manuais

Sem comentários

Adaptec 1744 Guia de Instalação Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec 1744