Adaptec 2100S - SCSI RAID Controller Guia do Utilizador descarregar pdf (Página 63)

3-18

Storage Manager

8 When you are finished creating arrays, exit Storage Manager.

You are prompted to save the configuration changes. If you

save the configuration, the build operation starts

automatically. If you have created multiple arrays, they are

built one at a time in the order created. You can also start the

build without exiting Storage Manager by selecting File–Set

System Configuration.

Note: The array initialization process can take several hours

to complete. You can exit Storage Manager and perform

other activities on the system while the build continues.

Arrays can be accessed while the initialization occurs as a

background task.

Furthermore, redundant arrays provide redundancy

immediately although the performance of the array will be

less than optimal until the initialization is complete.

RAID 1 arrays are created by copying the data on one drive of the

mirrored pair to the other. If you have specified a RAID 1 array, you

are prompted to select the direction of the copy as shown in

Figure 3-11.

Figure 3-11. Mirroring Drives in an Array

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 134 135

Sem comentários

Adaptec 2100S - SCSI RAID Controller Guia do Utilizador Página 63