
Adding a Flash Backup Module
This table shows the ash backup module (or “zero maintenance cache protection”) supported by your
Adaptec RAID controller. To purchase a ash backup module, refer to the Adaptec Web site at
www.adaptec.com.
Flash ModuleRAID Controller
Adaptec Flash Backup Module AFM-60
0 with Supercapacitor Card (optional)
Adaptec RAID 6805/Adaptec RAID 6445/Adaptec RAID 6405/Adaptec
RAID 6805T/Adaptec RAID 6405T
Adaptec Flash Backup Module AFM-60
0 (pre-installed) with Supercapacitor
Card
Adaptec RAID 6805Q/Adaptec RAID 6805TQ
Adaptec Flash Backup Module AFM-
700 with Supercapacitor Card
(optional)
Adaptec RAID 7805/Adaptec RAID 71605/Adaptec RAID 71685/
Adaptec RAID 72405
Adaptec Flash Backup Module AFM-
700 with Supercapacitor Card (pre-
installed)
Adaptec RAID 7805Q/Adaptec RAID 71605Q
Upgrading the Controller Firmware
To upgrade the rmware on your Adaptec RAID controller, follow the instructions in Using the Adaptec
Flash Utility on page 91. You can also use maxView Storage Manager or the ARCCONF command-line
utility to upgrade your controller rmware. Refer to the maxView Storage Manager User’s Guide and
the Adaptec Command Line Interface User’s Guide.
18Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00277-02-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide
Comentários a estes Manuais