
D Using the Adaptec Flash Utility
This chapter describes how to use the Adaptec Flash Utility (AFU), a text-based DOS utility that you can
use to update, save, or verify the RAID controller's rmware.
Caution: Although the AFU contains safeguards to prevent you from accidentally
damaging your RAID controller's ash contents, it is still important to use the AFU
carefully and correctly to avoid rendering your RAID controller inoperable. We
recommend that only advanced users familiar with working in DOS use the AFU. For
more information, see Managing Your Storage Space on page 64.
System Requirements
• DOS version 5.0 or later.
Note: You can’t run the AFU from a DOS command prompt window under any
version of Windows.
• At least 8 MB of extended memory.
Compatibility Notes
• Supports HIMEM.SYS; compatible with other DOS drivers running under HIMEM.SYS (for example,
SMARTDRV.SYS and SETVER.SYS).
• Does not support DOS extenders installed in memory, such as EMM386.SYS and DOS4GW.
Before You Begin
1. Obtain the rmware (see the following section).
2. Create rmware disk (see Creating the Firmware Update Disk on page 91).
There are two ways to run the AFU:
1. Using the AFU menus (see Running the Menu-based AFU on page 92)
2. From the command line (see Running the AFU from the Command Line on page 92)
Obtaining the Firmware
To obtain RAID controller rmware, go to:
• Adaptec Installation DVD—Includes the AFU executable (AFU.exe) and a separate ash image. The
ash image comprises a single User Flash Image (UFI) le.
• Adaptec Web site—Download a new rmware le to get the most recent version of rmware/BIOS
and AFU.
See www.adaptec.com for more information.
Creating the Firmware Update Disk
To create the rmware update disks:
1. Copy these les to a USB ash drive or writable CD:
• AFU.exe
• Axxxx01.u
where xxx is the model number of your controller.
Note: Most controller model numbers have a sufx (for example, Adaptec RAID
6405). Check that the .u le is the correct le for your controller before copying.
2. To use a menu-based AFU, see the following section.
To run the AFU from the command line, see Running the AFU from the Command Line on page 92.
91Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00277-02-A Rev. A, Issue:
Serial Attached SCSI RAID Controllers Installation and User's Guide
Comentários a estes Manuais