Adaptec 6405 Guia do Utilizador descarregar pdf (Página 45)

3. Select Logical Device Conguration, then press Enter .

4. Select Initialize Drives, then press Enter .

5. Select at least three disk drives for the array, press Insert for each selected disk drive, then press

Enter.

Caution: During initialization, all data is deleted from the disk. Before continuing,

back up any data you want to keep.

6. Press Y , then press Enter .

The selected disk drives are initialized, then the Logical Device Conguration screen appears.

7. Select Create Array, then press Enter .

8. Select the disk drives that were just initialized, press Insert for each selected disk drive, then press

Enter .

9. When the Array Properties screen opens, follow the instructions in the following table.

Entry or SelectionProperty Line

Select RAID 5, then press Enter .Array Type

Type a name, then press Enter .Array Label

Press Enter , then press Enter again to use the default granularity of GB.Array Size

Press Enter to use the default (256 KB).Stripe Size

Press Enter to use the default (Enable).Read Caching

Press Enter to use the default (Enable always), then press Y to conrm.Write Caching

Press Enter to use the default (Build/Verify).Create RAID via

Press Enter to use the default (Enable)MaxCache Read

Press Enter to use the default (Disable)MaxCache Write

Press Enter .[Done]

10. When a cache warning message displays, type Y .

11. Once the array is created, a message displays telling you that the array can now be used. Press any

key to return to the Logical Device Conguration menu.

You can start using the array immediately. However, performance is reduced until the build process

is complete.

12. Press Esc until the Exit utility window appears.

13. Select Yes, then press Enter.

The computer restarts.

14. Continue with Making Your Array Bootable on page 47.

Creating an Array with maxView Storage Manager

This section describes how to use the maxView Storage Manager conguration wizard to build an array.

Note: You will need the Adaptec Installation DVD to complete this task.

To create a RAID 5 array:

1. Insert the Adaptec Installation DVD into your DVD drive, then restart your computer.

2. When prompted, select the language you want, then press Enter .

45Proprietary and Condential to PMC-Sierra, Inc.

Document No.: CDP-00277-02-A Rev. A, Issue:

Serial Attached SCSI RAID Controllers Installation and User's Guide

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 109 110

Sem comentários

Adaptec 6405 Guia do Utilizador Página 45