Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guia de Instalação descarregar pdf (Página 114)

Address space At least 8 Kbytes are required with 4 Kbytes per socket

in the 640K-1MB range (not necessarily contiguous); if

there are three sockets, at least 12 Kbytes are needed

I/O space At least 8 and preferably 16 bytes per socket

IRQs One per socket, plus an IRQ for the pcic device

driver itself

Conﬁguration Procedure

Initial Installation and Conﬁguration

1. Consult the Conﬁguration Assistant for address space, I/O space, and IRQs

already used by system devices.

2. Insert the PC Card adapter.

3. Install the Solaris software, including the PCMCIA packages in the SUNWpcmc

cluster.

If you choose to install the Entire Distribution, the PCMCIA packages are

automatically included. After installation and reboot, any reconﬁguration is

done automatically.

If you choose any other distribution, such as the End User Distribution, select

Customize from the choices at the bottom of the Software Selection screen.

Then choose PCMCIA Support from the scrolling list on the Customize

Software screen. After installation and reboot, any reconﬁguration is done

automatically.

4. Reboot the system.

Adding PC Card Support to a Previously Installed System

1. Become root.

2. Use the pkgadd command and select PCMCIA Support from the Customize

Software screen.

3. Do a reconﬁguration reboot to reallocate resources:

102

Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 126 127

Sem comentários

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guia de Instalação Página 114