Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guia de Instalação descarregar pdf (Página 34)

Conﬁguration Procedure

Model names ending in “C” only: Run the BusLogic AutoSCSI conﬁguration utility

and check the termination and that the Advanced option “BIOS Support for > 2

Drives (DOS 5.0 or above)” is set to No.

BT-757C only: If the system has a narrow target, turn off the “wide negotiation

option” when conﬁguring devices.

Special Cases

Conﬁguring Multiple Devices

Select an adapter model ending in “C” as the primary controller.

Choose an I/O address for the primary controller that precedes the secondary

controller in “Supported Settings”; for example, use an I/O address of 0x234 for

the primary controller, and make sure the secondary controller uses either 0x130

or 0x134.

Disable the BIOS on the secondary controller.

Wide-mode EISA adapters can support targets greater than 7 if the proper entries

are added to the system conﬁguration ﬁles: /kernel/drv/sd (for disk) and

/kernel/drv/st.conf (for tape).

Device Reference Manual for Solaris 2.6 (Intel Platform Edition) ♦ April 1998

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 126 127

Sem comentários

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Guia de Instalação Página 34