Adaptec GDTSETUP Manual de Instalação descarregar pdf (Página 24)

,,,8VLQJ,QWHUDFWLYH81,;

After having explained the installation of the GDT Host Drive in chapters B and C as well as

that of the Host Drives, we would now like to give you a few hints regarding the installation

of the operating systems

Interactive UNIX V/386 3.2v3 and 3.2v4.

For successful installation, it is essential to read the Interactive system manuals thoroug-

hly. Besides the Interactive UNIX disks and documentation, the following GDT disks are

needed (they may be downloaded from our BBS or Website):

GDT Interactive UNIX 3.2v3&4 for sysadm

GDT Interactive UNIX 3.2v4 - for boot installation

(only for Interactive UNIX 3.2v4 and the boot installation)

,,,7UDQVSDUHQF\RI+RVW'ULYHV

The structure of the Host Drives, which have been installed with GDTSETUP (in chapter C),

is not known to UNIX. I.e., the operating system does not recognize that a given Host Drive

consists of a number of hard disks forming a disk array. To UNIX, this Host Drive simply

appears as one single hard disk with the capacity of the disk array. This complete transpa-

rency represents the easiest way to operate disk arrays under UNIX; neither UNIX nor the

PCI computer need to be involved in the administration of these complex disk array confi-

gurations.

,,,,QVWDOODWLRQDVDQDGGLWLRQDO&RQWUROOHU

Install the driver software with the help of sysadm, using the menu options Software, Install a

package. (The driver software for Interactive UNIX is on the

GDT Interactive UNIX floppy

disk

.). Now specify the drive containing the driver disk and select the floppy disk type

(720KB) (reading the floppy disk can take some time). During installation, a GDT driver cor-

responding to the IRQ used by the ICP Controller has to be selected. As discussed in chap-

ter B of this user’s manual, the PCI System BIOS automatically assigns an IRQ to a PCI INT.

The IRQ used by a ICP Controller is displayed by the GDT BIOS after a cold boot.

After having successfully completed the installation of the GDT driver, you may introduce

another GDT Host Drive into the system by using kconfig and its menu options Configure,

HPDD, Reconfigure HPDD. In the next menu you enter the connected SCSI devices (type of

device, SCSI-ID and LUN). After this, link a new kernel in kconfig by using Build, Build a kernel,

then install with Install. At the next system reboot, the GDT displays a screen listing all its

connected devices. Connected tapes are instantly ready for use, they can be accessed im-

mediately with programs such as mt for rewinding, deletion etc. Host Drives have to be

prepared with sysadm first, using the options Disk, Fixed Disk Management, Add a Fixed Disk to the

system (Partition Disk and Create UNIX Partitions), and mount to connect the file systems.

Please note that the hard disks must have been prepared (initialized) before with

GDTSETUP (the DOS configuration-program on the System Disk - DOS), and the Host

Drives must have been defined.

,,,,QVWDOODWLRQDV%RRW&RQWUROOHU

First initialize a hard disk connected to the ICP Controller (using GDTSETUP under DOS),

and install it as a Host Drive (see chapters C and I "Configure Host Drives"). The Host Drive

on which you wish to install the Interactive UNIX system must be assigned number 0

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 92 93

Comentários a estes Manuais

Sem comentários

Adaptec GDTSETUP Manual de Instalação Página 24

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec GDTSETUP