Adaptec GDTSETUP Manual de Instalação descarregar pdf (Página 45)

Function Possible Settings Factory Setting

Cache On

(*)

On, Off On

Delayed Write On

(*)

On, Off On

BIOS Enabled, Disabled Enabled

BIOS Warning Level All messages, Fatal errors Fatal errors

Supported BIOS drives 2, 7 2

Memory Test No Test, Standard, Double Scan, Intensive Standard

SCSI-ID 0,1,2,3,4,5,6,7 7

SCSI Termination On, Off, Auto On

(*)

Can also be changed with the GDTMON online utility.

9)LUPZDUH8SGDWH

The firmware, the BIOS and the GDTSETUP program of the ICP Controller are stored in a

Flash-RAM which is part of the ICP Controller hardware. In contrast to EPROMs, Flash-

RAMs can be re-programmed many times and without the complicated UV-light erasing

procedure. Thus, both software modules can be easily updated without having to remove

the controller from its PCI slot. Firmware and BIOS are part of the

*'7B53):

file. The file

has an extension (e.g. GDT_RPFW.009) which indicates the version stepping. The latest ver-

sion of the this file can be downloaded either from our 24h BBS (+49-(0)-7131-5972-15) or

from our Website http://www.icp-vortex.com. We recommend that you also download the

packed files which contain the latest programs/drivers for the operating system used on

your system. Observe the following order when carrying out the updating procedure:

1. Get the latest GDT_RPFW file for the ICP Controller (download it from our BBS, or our

Website, or ask for an upgrade disk if you do not have a modem). The file does NOT

need to be expanded !

2. Format a 3.5" HD disk (1.44MB) and copy the GDT_RPFW file on this disk.

3. After loading GDTSETUP (from Flash-RAM or from disk under MS-DOS) select the de-

sired ICP Controller for the firmware update and press the <F2>-key to enter the Ad-

vanced Setup.

4. Select Configure Controller and thereafter Firmware Update. Insert the disk with the firmware

file into drive A. GDTSETUP loaded from the Flash-RAM will display a list of the valid

files found on the disk. If you have loaded GDTSETUP from disk you have to enter the

path "A:", first.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 92 93

Sem comentários

Adaptec GDTSETUP Manual de Instalação Página 45