Adaptec GDTSETUP Manual do Utilizador descarregar pdf (Página 93)

The screen shows you:

 the channel to which a SCSI device is connected

 which SCSI-ID the drive has (the entry SCSI I/O Processor stands for the corresponding

SCSI channel of the ICP Controller. It has the default setting ID 7, as explained in chap-

ter B)

 the initialization state

 the SCSI names of the drives

 the Read-Write-state. [RW] = Read + Write

 the gross capacity

 membership in a Logical, Array or Host Drive

Use the cursor keys n and p to select the drive you wish to initialize. We start with the first

drive of the list. With this drive selected, press <ENTER>.

(Note: On Channel B, SCSI IDs 0 and 5, are devices which are not relevant for our example.)

The Configure Disk menu appears which shows various options.

For our example we choose the Initialize Disk menu option and press <ENTER>.

The parameters within this menu can be changed by pressing <ENTER> and selecting the

new setting.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 217 218

Sem comentários

Adaptec GDTSETUP Manual do Utilizador Página 93