Adaptec 2120S - SCSI RAID Controller Guia do Utilizador descarregar pdf (Página 182)

100

101

6-10

Adaptec SCSI RAID Software Reference Guide

controller firmware update

To update a controller’s flash components from the flash image data

in a pair of user flash image (UFI) files, use the controller

firmware update command. This command can update the flash

components on a single controller or multiple controllers.

Syntax

controller firmware update

[/C[{controller_ID}][{controller_ID}...]

{/D{UFI_file_path}]

Switches

/C{controller_ID}

Specifies the controller ID representing the set of controllers on

which to perform the firmware update.

If you do not specify this switch, the firmware update is

performed on controller 0.

/D{UFI_file_path}

Specifies the path where the pair of UFI files are located.

If you do not specify this switch, this command looks for or

creates a pair of UFI files in the current default drive and

directory.

Examples

The following example updates a controller’s firmware.

AAC0> controller firmware update D:\...

Executing: controller firmware compare “D:\...”

!!The controller’s firmware has been successfully updated; you need to

restart the system!!.

Related Information:

controller commands:

■ controller firmware compare (page 6-7)

■ controller firmware save (page 6-8)

1 2 ... 177 178 179 180 181 182 183 184 185 186 187 ... 353 354

Comentários a estes Manuais

Sem comentários

Adaptec 2120S - SCSI RAID Controller Guia do Utilizador Página 182

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec 2120S - SCSI RAID Controller