Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Especificações descarregar pdf (Página 54)

Model PDP Series 200 maxDPU4E Hardware Guide

Attach the Null Modem serial port cable (Laplink Metso

#046853) between the PC and the DPU Chassis’s 9-pin

connector. Use the 9-pin Male-to-Male Gender Changer (Metso

Automation #050100) if necessary.

Make note of which PC comm port (e.g., 1 or 2) being used.

Set the DPU Mode Switch on to “4”.

Power up the DPU.

Change the directory to \DPU4E\BIOS.

Make sure latest BIOS.ROM, embflash.exe, client.bin and

platform.* files exist in the working directory, \DPU4E\BIOS.

Start the EmbFlash utility by typing “emb.bat” OR “embflash

/comx /b=platform.240” at the command prompt.

The “x” in comx represents 1 or 2 for the PC’s comm port being

used and “platform.240” means that 240K bytes of the 256K

flash is being programmed. (Note: The top 16K Boot Block

should NOT be reprogrammed.)

The program’s progress will be indicated by beeps.

If any errors occur, then restart the DPU and PC and try again.

Metso Automation MAX Controls Inc. • 278590 •

A-8

1 2 ... 49 50 51 52 53 54 55 56 57 58

Sem comentários

Adaptec 1542B - AHA Storage Controller Fast SCSI 10 MBps Especificações Página 54