Adaptec AHA-1540CP Guia do Utilizador descarregar pdf (Página 100)

6-18

Adaptec 7800 Family Manager

[xxxxx09D] Unexpected interrupt

The Adaptec driver received an interrupt from the system that does not

correspond to any adapter supported by the driver. This could be caused by

another host adapter from a different vendor, such as a video card or a

network card. The problem can also be caused by malfunctioning hardware.

[xxxxx0a3] Adapter diagnostic failure - possible resource conflict

The driver failed the internal software or hardware diagnostic. Refer to your

host adapter’s user’s guide for troubleshooting information.

[xxxxx0ca] Cannot initialize device

The system, host adapter, or target device is busy or is not responding. The

target device could not be initialized.

[xxxxx0cb] Unable to allocate memory. Decrease alad_instr_buffersz in

space.c

The driver has requested a larger buffer size than the available RAM. Either

increase the amount of RAM in the system, or decrease the user option

alad_instr_buffersz in the

/etc/conf/pack.d/alad/space.c

file.

[xxxxx0cc] CONFLICT: Disconnection must be enabled in order for tag-

queueing to work

Use the SCSISelect utility of your host adapter to enable Disconnection for

each device reporting this message. Alternatively, disable tagged queuing in

/etc/conf/pack.d/alad/space.c

file by setting

alad_do_tagged = 0

. If

tagged queuing is disabled, performance may be negatively affected.

❒

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 119 120

Sem comentários

Adaptec AHA-1540CP Guia do Utilizador Página 100