Adaptec AHA-1540CP Guia do Utilizador descarregar pdf (Página 91)

6-9

SCO UNIX Installation

5 Modify the

mscsi

file according to your hardware setup:

– If you are booting from a 7800 Family host adapter, make sure the

host adapter prefix for the host adapter number 0 is

alad

– If you are not booting from a 7800 Family host adapter, make sure

the host adapter prefix for the host adapter number 0 is the

appropriate prefix for each device on your primary Adaptec host

adapter. See the table below:

6 Save the file and exit the text editor.

Rebuild the UNIX Kernel

To rebuild the UNIX kernel with the new changes, follow these steps:

1 Type the following at the # prompt and press Enter after each line:

cd /etc/conf/cf.d

./link_unix

Status messages appear.

2 When the kernel has been built, shut down the system by typing

haltsys and pressing Enter.

3 Turn

OFF

the system power when you are prompted to do so.

The UNIX kernel has been prepared for 7800 Family host adapter

operation.

Boot the New Kernel

To reboot the computer with the new kernel, follow these steps:

1 Follow the onscreen instructions to reboot your system, usually by

pressing Enter.

Host Adapter

Prefix

Type of

Driver

Primary Adaptec

Host Adapter

eiad

spad

arad

smad

alad

blad

embedded

BTLD

AHA-1540/1640 family

AHA-1740 family

AIC-6260 family

AIC-7770 family

AIC-6260/6360 family

AIC-78xx, AIC-7895

AIC-789x

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 119 120

Comentários a estes Manuais

Sem comentários

Adaptec AHA-1540CP Guia do Utilizador Página 91

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec AHA-1540CP