Adaptec AHA-1540CP Guia do Utilizador descarregar pdf (Página 72)

5-6

Adaptec 7800 Family Manager

9 Follow the instructions in your OS/2 documentation to complete the

installation.

Note:

The update files

os2ldr

and

ibmint13.i13

included with

the Adaptec 7800 Family Manager Set are not needed when

installing OS/2 Warp.

After installation is complete, verify that only one

basedev=aic7870.add statement exists in the

config.sys

file on

your hard drive. Remove other instances if more than one is found.

Installing the Driver When OS/2 is

Already Installed

To update or install the

aic7870.add

aic78u2.add

driver if OS/2 is

already installed, follow the instructions below. The procedures are similar

for all versions of OS/2. Procedures that are specific to an OS/2 version are

noted when necessary.

1 If you are updating the driver, simply copy the

aic7870.add

aic78u2.add

driver from the 7800 Family Manager Set diskette for

OS/2 (e.g.,

\os2\aic7870.add

\os2\aic78u2.add

) into the

\os2

directory (for OS/2 v2.1x) or

\os2\boot

directory (for OS/2 Warp

3.x, 4.x, or 4.x SMP) on your hard disk. (Make a backup copy of the

older driver before doing this.) This overwrites any existing version

of the driver in the directory. Updating of the driver is complete; do

not continue with Steps 3 through 5.

Note:

The

aic78u2.add

driver does not support OS/2

v2.1x

If OS/2 has been installed and does not recognize the Adaptec 7800

Family host adapter, or if you are adding your Adaptec 7800 Family

host adapter to your OS/2 computer, you need to install the driver. To

do so, continue with Step 2:

2 Run the

ddinstal

program by selecting the Device Driver Install

icon from the System Setup folder or by typing ddinstal at the OS/2

prompt.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 119 120

Comentários a estes Manuais

Sem comentários

Adaptec AHA-1540CP Guia do Utilizador Página 72

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec AHA-1540CP