Adaptec AHA-1540CP Guia do Utilizador descarregar pdf (Página 24)

2-6

Adaptec 7800 Family Manager

8 If the following message appears, click New to replace the existing

driver and skip to Step 10.

The driver(s) for this SCSI Adapter are already on the

system. Do you want to use the currently installed driver(s)

or install new one(s).

If the following message appears, continue with Step 9.

Please enter the full path to the Windows NT SCSI Adapter

files.

9 Change the path to the a:\winnt\3_5 directory, then click Continue.

The device driver is copied to your system disk and the Windows NT

configuration is updated so that the new device driver loads when

Windows NT reboots.

10 When the installation is complete, Windows NT Setup again displays

a list of currently installed host adapter types. Verify that the new host

adapter appears on the list. The text string should look similar to:

Adaptec AHA-290x/291x/294x/4944/AIC-78xx PCI SCSI

Controller (NT 3.5x)

Adaptec AHA-294xu2/AIC-7890/91 PCI Ultra2 SCSI Controller

(NT 3.5x)

Add other types of host adapters if necessary (see step 4 on page 2-5),

or click Close to exit the SCSI adapters portion of Windows NT

Setup, and then close the program.

12 When you see this message, click OK to exit:

The changes you have made will not take effect until the

computer is restarted

If this message does not appear, no changes have been made to the

Windows NT system configuration.

13 Restart your computer and Windows NT. It is possible that some

drive letter assignments may change from the previous configuration.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 119 120

Sem comentários

Adaptec AHA-1540CP Guia do Utilizador Página 24