Adaptec AHA-1540CP Guia do Utilizador descarregar pdf (Página 78)

5-12

Adaptec 7800 Family Manager

Troubleshooting

Problems and Solutions

How do I assign an interrupt for the host adapter?

The interrupt assignment is handled via the motherboard BIOS. You may or

may not be able to assign an interrupt manually. Refer to your motherboard

or system documentation.

During installation, OS/2 fails to find the hard drive.

Make sure the latest driver from Adaptec has been installed. Add the

/pcihw or /!pcihw command option to the basedev=aic7870.add (or

aic78u2.add

) driver statement in the

config.sys

file.

Does extended translation need to be enabled on the host adapter to

support drives greater than 1GByte?

Under OS/2, if you are using a FAT file system and/or switching back and

forth from DOS, extended translation should be enabled. If you are using

HPFS (High Performance File System), extended translation may or may

not be enabled. Once the driver for the host adapter loads, the remaining

hard drive space will be seen beyond 1024KBytes.

Error Messages

The error messages listed below are the messages associated with the

aic7870.add

aic78u2.add

driver. Messages are listed sequentially

according to the last three digits of the error code. For example,

[xxxxx080], [xxxxx081], [xxxxx082], etc.

Note:

When reporting problems to Customer Support, be sure to

include the complete error code in your problem description.

[xxxxx080] Unable to allocate memory

This indicates that there may be a problem with the amount of memory

installed in your system. Verify that your system has at least the minimum

amount of memory required by your operating system.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 119 120

Sem comentários

Adaptec AHA-1540CP Guia do Utilizador Página 78