Adaptec AHA-1540CP Guia do Utilizador descarregar pdf (Página 54)

4-8

Adaptec 7800 Family Manager

fixed_disk= on, off on Enables/disables support for

hard disks. By default, hard

disks are supported. You may

want to disable hard disk

support in order to load an

ASPI Fixed Disk Module.

flush_diskreq= 00-FFFF 0 A bit mask to send

occasionally ordered tags to

specific targets. By default,

no targets receive

occasionally ordered tags.

This bit mask is entered in

hex (see Bit Mask Options on

page 4-11).

instr= on, off off Enables/disables recording of

I/O statistics.

io_combine= 1-32 16 Specifies maximum number

of segments in a

scatter/gather list.

lun_enable=

00-FFFF 01 A bit mask to enable

scanning for specific LUNs

on all targets. The default

value of 01 causes the driver

to scan LUN 0 only. This

enable bit mask is entered in

hex (see Bit Mask Options on

page 4-11.)

max_tags= 1-128 16 Specifies maximum number

of tagged commands per

device.

multlun_targets 00-FFFF FFFF A bit mask to enable LUNs

on selected targets. By

default, LUNs on all targets

are enabled. This bit mask is

entered in hex (see Bit Mask

Options on page 4-11).

read_after_write 0-1 1 Specifies default verify

mode; 0 = Off (No verify on

writes), 1 = On (Hardware

verify).

Option Values

Defau

lt Description

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 119 120

Comentários a estes Manuais

Sem comentários

Adaptec AHA-1540CP Guia do Utilizador Página 54

Comentários a estes Manuais

Manuais e produtos relacionados com Software Adaptec AHA-1540CP