Adaptec SAS RAID Controllers Guia de Instalação descarregar pdf (Página 44)

30 Sun StorageTek SAS RAID HBA Installation Guide • March 2010

10. When the Array Properties screen is displayed, follow the instructions in the

following table.

11. If a cache warning message is displayed, type

12. After the array is created, a message is displayed telling you that the array can

now be used.

13. Press any key to return to the ACU Menu.

You can start using the array immediately. However, performance is reduced until

the build process is complete.

14. Press Esc until the Exit utility window is displayed.

15. Select Yes, then press Enter.

The computer restarts.

16. Continue with “Installing an OS Onto a Bootable Array on an x64 System” on

page 39.

TABLE 3-1 Filling in Array Properties Screen

Property Line

Entry or Selection

Array Type

Select RAID 5, then press Enter.

Array Label

Type a name, then press Enter.

Array Size

Press Enter, then press Enter again to use the default granularity of GB.

Stripe Size

Press Enter to use the default (256 KB).

Read Caching

Press Enter to use the default (Yes).

Write Caching

Press Enter to use the default (Disable).

Caution - When write cache is enabled, there is a slight possibility of

data loss or corruption during a power failure.

Create RAID via

Press Enter to use the default (Build/Verify).

[Done]

Press Enter.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 147 148

Sem comentários

Adaptec SAS RAID Controllers Guia de Instalação Página 44