Adaptec SAS RAID Controllers Guia de Instalação descarregar pdf (Página 69)

Chapter 8 Known Issues 55

The System Freezes When a Sun Storage 32GB

SLC SATA Solid State Drive (SSD) is Configured

In the HBA

CR 6806467

Issue: This occurs because the HBA has firmware prior to version 16732 installed on

it and the Sun Storage 32GB SLC SATA SSD has firmware version 8626 or earlier

installed on it.

Workaround: Do the following:

1. Upgrade the HBA to firmware version 16732, at minimum.

You can obtain the latest HBA firmware at:

http://support.intel.com/support/go/sunraid.htm

2. Power cycle the HBA host system.

3. Upgrade the SSD to firmware version 8850, at minimum.

You can obtain the latest SSD firmware at: http://www.sunsolve.sun.com

4. Power cycle the SSD.

Cannot Access the HBA From the GUI Nor Access

a LUN From the Host

CR 6820225

Workaround: Reboot the host system on which the HBA resides.

Data Miscompare With 3.5" SAS Disks

CR 6822080

Issue: After repeatedly scanning a Seagate SAS Cheetah 15K disk, inconsistent data

is reported, even though nothing has changed on the disk. This is due to an old

firmware version (prior to 0A1C) on the Seagate SAS Cheetah 15K disk, model

ST3450856SS (Sun part number: 390-0424-03).

Workaround: Upgrade the firmware on the Seagate SAS Cheetah 15K disk to version

0A1C, at minimum.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 147 148

Sem comentários

Adaptec SAS RAID Controllers Guia de Instalação Página 69