Adaptec SAS RAID Controllers Guia de Instalação descarregar pdf (Página 90)

76 Sun StorageTek SAS RAID HBA Installation Guide • March 2010

Using the Disk Utilities to Manage Disk

Drives

You can use the disk utilities, another tool in the BIOS RAID Configuration utility, to

low-level format or verify your disk drives. (New disk drives are low-level formatted

at the factory and do not need to be low-level formatted again.)

Caution – Before you format a disk drive, back up all data. Formatting destroys all

data on a disk drive.

This section contains the following subsections:

■ “To Format or Verify a Disk Drive With the Disk Utilities” on page 76

■ “To Locate Disk Drives With the Disk Utilities” on page 76

■ “To Identify Disk Drives With the Disk Utilities” on page 77

▼ To Format or Verify a Disk Drive With the Disk

Utilities

1. Start the BIOS RAID Configuration utility.

See “To Start the BIOS RAID Configuration Utility” on page 68.

2. Select the HBA you want, then press Enter.

3. Select Disk Utilities.

4. Select the disk drive you want, then press Enter.

5. Select Format Disk or Verify Disk Media.

▼ To Locate Disk Drives With the Disk Utilities

Note – This feature is only available with disk drives that have an activity LED.

You can use the Identify Drive feature to physically locate a disk drive by blinking

the LED.

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 147 148

Sem comentários

Adaptec SAS RAID Controllers Guia de Instalação Página 90