Adaptec SAS RAID Controllers Guia de Instalação descarregar pdf (Página 66)

52 Sun StorageTek SAS RAID HBA Installation Guide • March 2010

▼ To Install the Driver On the VMware Technology

Note – The embedded driver provided by VMware ESX Server is suitable for most

applications. If an updated driver is needed, use the following procedure.

1. Start the computer, then insert the driver CD.

2. At the console screen of the VMware ESX Server, mount the CD.

For example:

mount –r /dev/cdrom

/mnt/cdrom.

3. Install the module RPM:

rpm –ivh /mnt/cdrom/xxx/yyy.rpm

where

xxx

is the driver path, and

yyy.rpm

is the rpm file.

4. Reboot the computer and remove the driver medium.

Note – The Sun StorageTek RAID Manager GUI is not supported with VMware

technology. To create and manage arrays, use the command-line interface and the

BIOS utility. See the Uniform Command-Line Interface User’s Guide at:

http://docs.sun.com/app/docs/prod/stortek.raid.hba#hic

Next Steps

Do either of the following:

■ Install and use the Sun StorageTek RAID Manager GUI to create arrays on the

disk enclosure. See the Sun StorageTek RAID Manager User’s Guide.

■ If you are using an x64 system, you can also use the BIOS utility to create arrays

on the disk enclosure. See “Using the BIOS RAID Configuration Utility” on

page 65.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 147 148

Sem comentários

Adaptec SAS RAID Controllers Guia de Instalação Página 66